M14 is an automatic rifle used for high-intensity shooting with little regard for accuracy. It is perfect for high-intensity shooting where speed is of higher priority. Therefore, to compensate for its reduced accuracy, a scope is used to increase aiming and improve shooting accuracy.
And for a scope to sit on the M14 firmly and securely, a scope mount is needed to secure the scope to the weapon. As scope mounts may not be a popular shooting accessory like the mount itself, it is just as important without a mount. Your scope is just a piece of monocular you can use for bird watching.
Every weapon has its suitable mounts that ensure the scope fits and does not obstruct other gadgets or even the user. Because of the way scopes are built, you need the right mount for it if you must enjoy and utilize the full potential of your scope and rifle.
The good thing is that there are not as many scope mounts available as scopes, so you do not have to go through the stress of selecting from an insane number of mounts. However, there’s a catch, with scope mounts, mistakes are more costly. If you make the wrong decision, you may have to change the mount or endure a loose-fitting with poor shooting accuracy.
Yes, if the scope doesn’t sit securely on the weapon, it shakes and renders your zero incorrect, which in turn skews your shooting. This guide will show you the top scope mounts you should consider if you want the absolute best out of your scope and M14 automatic rifle.
Table of Contents
Best Scope Mounts for M14
Owning an M14 without a scope will severely limit your shooting ability if you value accuracy. It gets even worse if you own an M14, a scope but without a scope mount or an unsuitable mount. And that’s the reason you should pay attention to this list of tried and trusted mounts that will not only fit on top of your M14 rifle but will hold the scope firmly.
|UTG New Gen Locking Deluxe Scope Mount||• Affordable|
|Sadlak M14 Aluminum scope mount||• Extremely lightweight|
• 3-point clamping system
• Sophisticated features
|Aim Sport M14 Scope Mount||• Extremely affordable|
• Holds zero
• Durable build
|M1SURPLUS Scope Mount Rail||• Second generation mount|
|New Generation Locking Deluxe M14 Scope Mount||• Easy to install|
• Holds zero
• Comes with all hardware for installation
#1. UTG New Gen 4-Point Locking Deluxe Scope Mount
This scope mount is made by UTG – a well-known optics and weapon accessories manufacturer. It fits the M14 rifle to the tee while delivering massively. UTG gears are made in the US, which is often associated with improved quality as more regulations and standards are met.
This UTG New Gen scope mount sports a simple system of operation with amazing features. You’ll find locking points across the side plate and a horizontal bottom guide. You can adjust these points when zeroing by using the side screws. It holds zero perfectly as it does not shake or move out of place once you secure it to the rifle. The only downside here is that it is not a quick-release mount, which means you will have to zero again when you remove the mount.
Its one-piece design and aircraft-grade aluminum body ensure it remains robust and reliable even under a lot of pressure. Weighing only 5.7 ounces, this scope is lightweight. The overall weight of your gadgets is reduced, thus, saving your space in your backpack and energy in moving them around.
Its impressive versatility and adaptability are evident as the see-through design means you can use the original rifle scope. It will fit different scope types and rings, so you don’t have to keep purchasing mounts whenever you change your scope. The mount fits Picatinny rail with 15 slots, weaver rings, and others.
- Impressive versatility as it fits Picatinny rails, weaver rings, and a host of others
- It is lightweight, weighing only 5.7 ounces
- Improved durability with its one-piece, aircraft-grade aluminum body
- Holds zero well as it stays firm on the M14
- It is not a quick-release mount
#2. Sadlak M14 Aluminum scope mount
While the majority of the brands producing shooting gears make for a wide range of markets, Sadlak is doing something different by focusing its effort on a particular weapon, the M14. Its focus on making gears for this weapon has allowed it to experiment and implement better features and built than other manufacturers.
This mount is made specifically for the M14 rifle with a robust 3-point contact design from 7075 heat-treated aluminum. The aluminum body may not be the most rugged design but should hold its own when doing the less demanding shooting, for e.g., during hunting. Its hard coat anodized finish creates a sleek mount that will not rust or damage easily.
When it comes to the weight of the mount, this Sadlak M14 mount is as lightweight as it gets at 4.3 ounces. Measuring 5-7/16″ in length and 1 ¾” wide, it uses its 3-point system to clamp down. This system includes the receiver ring, charger guide dovetail, and receiver mount lug.
It is firm and holds zero perfectly except when you remove the mount as it does not have a quick detach feature. It is compatible with Picatinny rails and weaver-type fittings, so you can use the mount for a variety of scopes on your M14.
- Extremely lightweight at only 4.3 ounces
- Improved features from Sadlak
- Hard coat anodized finish to prevent scratch and damages
- Uses a 3-point system to clamp
- Works with Picatinny rails and weaver rings
- No quick detach feature
#3. Aim Sport M14 Scope Mount
If the price of the Sadlak mount above puts you off, here is an inexpensive Aim Sport Mount you can get. This scope mount may not be the most sophisticated option, but it presents a simple yet effective system and is perfect for those that want the basics. Surprisingly, despite its somewhat basic design, newbies may find this mount a little too complex.
It fits any standard weaver ring, and even though it may not present the versatility of the mounts previously mentioned, it gives you options. With minor fittings, you can match the mount to the M14 rifle you have. It weighs 10.9, which is a few ounces out of the lightweight zone.
This Aim Sport M14 mount is made using aircraft-grade aluminum to improve durability and keep the weight minimum. And when mounted, it is firm and robust as this scope uses special Aim Sport features to stay in place and retain your zero. The black coat anodized finish will prevent scratches and wear off from exposure to the elements.
- Extremely affordable
- Durable aircraft-grade aluminum build
- Holds zero
- Black anodized finish for a good look
- A bit heavy
- Will require minor fittings to match
#4. M1SURPLUS Scope Mount Rail
The M1SURPLUS mount is like a universal mount that fits Picatinny and weaver rings perfectly. It is an impressive mount when it comes to versatility, as it’ll not only fit your M14 rifle, but also many other rifles. This gives you options and saves you money as you don’t have to buy new mounts for all your rifles if you have more than one. Aside from the M14, this mount is also compatible with the well-known Ruger brand of rifles. It’ll also work well with reflex sights.
It is made from 6061-grade aluminum for durability, so it does not break when exposed to heavy pressure from its use. It is also coated to prevent scratches and other damages that may occur due to exposure to the elements.
The M1SIRPLUS mount is very affordable, which makes it a great option for people on a tight budget and others looking for a backup mount. Even with its basic design and build, you’ll be getting value for your money with this scope mount.
The mount is 5.2 inches long and ⅞” wide. It is a second-generation scope mount with a better mounting system and tighter tolerances.
- Second-gen mount
- Affordable mount
- Amazing versatility as it can be used for several scopes and rifles
- Basic design
#5. New Generation Locking Deluxe M14 Scope Mount
This new generation mount made for the M14 rifle comes with a Picatinny rail allowing you to use it for any Picatinny or Weaver scopes on your M14. Its versatility and affordable price are some of the major pulls for this mount.
It is a lightweight mount weighing only 5.6 ounces, which means a lesser weight to carry in your backpack and on your rifle when moving in the field. The scope mount is easy to install as you wouldn’t need any special lecture if you know the basics of mount installation. The mount will fit all M14 rifles and their variants perfectly without any issues.
Its one-piece body is made from aluminum for a more robust mount that can withstand recoil pressure and light drops. All the hardware you need for the installation is added to this mount which is even more impressive considering its affordable pricing. And because it is made to fit the rifles perfectly, it can hold zero for a long time.
- Affordable scope mount
- It Fits Picatinny and weaver scopes
- One-piece aluminum body for increased durability
- Comes with all hardware for installation
- Easy to install
- Holds zero
- The quality of the mounting screw can be improved
Initially, M14 rifles were not made to carry scopes, but constant adjustments from manufacturers and the zeal of the users to keep using their M14 while enjoying better accuracy has led to scopes being used. The use of scopes for the M14 has not become mainstream yet and as such finding a suitable scope mount for your rifle is not an easy task. Luckily, this guide has done justice to that issue by listing some of the best mounts you can use.